How to Clean Chemex in Less Than Five Minutes

how to clean chemex

If you’re a coffee-lover, then you know that there’s nothing quite like the taste of a fresh cup of Chemex brewed coffee. But if you’re not careful, it can be easy to let your Chemex get dirty and start affecting the taste of your coffee.

That’s why it’s important to learn how to clean Chemex properly and keep your coffee brewing process running smoothly.

In this blog post, we will guide how to clean Chemex and show you some tips to make it easier. There are a few things that you can do to clean chemex and keep it in the good we’ll outline the steps you need to take to clean your Chemex effectively so that you can continue enjoying delicious cups of coffee every morning.

What is a Chemex?

A Chemex is a specialized coffee brewer that uses a glass flask with a cone-shaped filter on the top. It’s popular for its ability to produce smooth, flavorful coffee with a clean and delicate taste.

Benefit make coffee with Chemex

The Chemex brewer has a few key benefits that make it a popular choice for coffee lovers.

First, the cone-shaped filter helps to produce a smoother cup of coffee with less sediment than other brewers.

Second, the glass flask allows you to see the brewing process, which is great for coffee aficionados who love watching their coffee brew.

Third, the Chemex brewer is easy to clean and doesn’t require any special tools or chemicals.

Disadvantage make coffee with Chemex

There are a few downsides to using the Chemex brewer:

First, it can be tricky to get the coffee ratios just right, and it takes some practice to get your coffee brewing process down

Second, the glass flask is delicate and can easily break if not handled properly

Third, the Chemex brewer can be slow to brew compared to other brewers.

How to clean Chemex in general

What You’ll Need :

– Warm water

– White vinegar

– Paper towels or a dishcloth

– Coffee filters

– A sink or a bucket

Now that you know what a Chemex is and some of the benefits of using one, let’s take a look at how to clean one properly. The steps involved in cleaning your Chemex will vary depending on how often you use it and how dirty it gets. But in general, there are a few things that you can do to clean it effectively:

  1. Disassemble the brewer: The first step in cleaning your Chemex is to disassemble it and remove all of the parts. This includes the glass flask, the cone-shaped filter, and the gasket that seals the two together.
  2. Soak the parts in warm water: Next, soak all of the parts in a bucket or sink filled with warm water. You can add a little bit of white vinegar to help break down any coffee oils or residue that may have built up.
  3. Scrub the parts with soap: After soaking the parts for a while, use a brush or scrubber to give them a good scrubbing. Be sure to clean all of the nooks and crannies, especially the area around the gasket.
  4. Rinse the parts thoroughly: Once you’ve scrubbed all of the parts clean, be sure to rinse them thoroughly with warm water. This will help remove any remaining soap or vinegar.
  5. Reassemble the brewer: Once everything is clean and dry, reassemble the brewer and replace the cone-shaped filter.

Now that your Chemex is clean, you can continue brewing delicious cups of coffee every morning. Just be sure to follow these steps regularly to keep your brewer in good condition.

Clean Chemex with salt and ice 

Another way to clean your Chemex is by using salt and ice. This method is a little more involved, but it can be a great way to get rid of any coffee oils or residue that may have built up over time

Tool You Need:

  • Chemex
  • Salt
  • Water
  • Ice cubes

Instructions:

  1. Fill your Chemex with hot water to preheat it.
  2. Add a tablespoon of salt to the bottom of your Chemex.
  3. Pour out the hot water and add cold water and ice cubes to the Chemex.
  4. Pour the coffee grounds into the Chemex and stir them around a bit with a spoon.
  5. Place the Chemex on top of a pitcher or other container that will catch the runoff.
  6. Wait for the coffee to drip through, then serve. Enjoy!

Cleaning Chemex baking soda and vinegar

You will need:

  • -Baking soda
  • -Vinegar
  • -Water
  • -Paper towels
  • -A rubber band

Instructions:

  1. Pour a small amount of baking soda into the Chemex and use a paper towel to spread it around.
  2. Fill the Chemex with 1/2 cup of vinegar.
  3. Put the Chemex on the stove and turn it up to high heat.
  4. When the vinegar starts boiling, remove the Chemex from the heat and let it cool for a few minutes.
  5. Carefully pour out the vinegar and rinse the Chemex with water.
  6. Use a paper towel to spread a small amount of baking soda on the bottom of the Chemex.
  7. Fill the Chemex with water and put it back on the stove.
  8. Bring the water to a boil and let it cool for a few minutes.
  9. Pour out the water and rinse the Chemex with cold water.
  10. Put the Chemex back on the stove and turn it up to high heat.
  11. When the baking soda starts boiling, remove the Chemex from the heat and let it cool for a few minutes.
  12. Carefully pour out the baking soda and rinse the Chemex with water.
  13. Put the Chemex back on the counter and let it dry.

Putting your Chemex in the dishwasher

Some people have also had success cleaning their Chemex brewer by putting it in the dishwasher. However, I do not recommend this method, as it can be difficult to get all of the nooks and crannies clean. If you decide to try this method, be sure to use a gentle cycle and avoid using any harsh detergents.

How Often Should You Clean Your Chemex?

How often you need to clean your Chemex depends on how often you use it and how much coffee oils and residue build-up. If you use your Chemex regularly and clean it after each use, you may not need to clean it more than once a month.

However, if you don’t use it as often or if coffee oils and residue build-up, you may need to clean it every week or two. It’s important to be vigilant about cleaning your brewer, as dirty parts can lead to bacteria or mold growth.

how to clean a chemex
how to clean a chemex

How to dry your Chemex the right way, so it appears even cleaner

Once you are done cleaning your Chemex, there is one more critical step to take – drying it the right way. If you don’t dry it properly, water can seep into the wood and cause it to warp. Here are the steps you need to take:

  1. Disassemble the brewer: The first step is the same as in all of the previous methods – disassemble the brewer and remove all of the parts.
  2. Place the parts on a towel: Next, place all of the parts on a clean towel.
  3. Wipe down the parts with a dry cloth: Next, use a dry cloth to wipe down all of the parts. Be sure to get into all of the nooks and crannies, especially the area around the gasket.
  4. Allow the parts to dry:  Finally, allow the parts to dry completely before reassembling the brewer. If you don’t have any vinegar or salt on hand, you can also use baking soda to clean your Chemex brewer.

Tips to make delicious coffee with Chemex

Brewing coffee with a chemex can be a bit of a hassle, but it’s worth it for the delicious cups of coffee you can brew with it. By following these tips, you can make the most of your chemex and enjoy fresh, delicious coffee every morning.

  1. Use coarse ground coffee: Coarse ground coffee is best suited for brewing with a Chemex. This will help to ensure that the coffee grounds don’t clog up the filter.
  2. Grind your own coffee beans: grinding your own beans is always preferable, as it results in fresher coffee. If you don’t have a grinder, you can buy pre-ground coffee specifically for use in a Chemex.
  3. Use hot water: The water should be around 200 degrees Fahrenheit – any hotter and the coffee will be bitter.
  4. Use a gentle brewing process: Brewing coffee with a Chemex requires a slow, gentle process. This will help to extract the most flavor from the beans.
  5. Start with a small number of coffee grounds: You don’t need to use a lot of coffee grounds – just enough to cover the bottom of the filter. If you use too much, it will be difficult to pour the coffee without spilling it.
  6. Pour slowly and steadily: Pour the water slowly and steadily over the coffee grounds, allowing it time to drip through the filter. Don’t try to pour all of the water at once, or you’ll end up with a mess.
  7. Serve and enjoy: Once the brewing process is complete, serve the coffee in a Chemex-specific cup and enjoy!

FAQ:

Q: How do I disassemble the Chemex brewer?

A: The first step is to remove the glass carafe. Next, unscrew the top portion of the brewer and remove the filter holder. Finally, remove the gasket from the bottom of the filter holder.

Q: Is Chemex easy to clean?

A: Yes, it is easy to clean. All you need is a mild detergent and hot water.

Q: What type of coffee should I use in my Chemex?

A: Coarse ground coffee is best suited for brewing with a Chemex.

Q: Can I use cold water to make coffee in my Chemex?

A: No, you should use hot water. The ideal temperature is around 200 degrees Fahrenheit.

Q: What is the best way to dry my Chemex?

A: After cleaning, place all of the parts on a towel and wipe them down with a dry cloth. Allow the parts to dry completely before reassembling the brewer.

Q: Can you wash Chemex in the dishwasher?

A: No, Chemex is not dishwasher safe. You should wash it by hand with a mild detergent and hot water.

Q: How do you clean a pour-over coffee carafe?

A: Pour-over coffee carafes can be easily cleaned by hand with a mild detergent and hot water. Just be sure to rinse well and allow them to dry completely before use.

Q: Why is my Chemex coffee cloudy?

A: If your Chemex coffee is cloudy, it means that you didn’t rinse the brewer well enough after cleaning. Be sure to rinse all of the parts with a mild detergent and hot water to prevent this from happening.

Q: Which is better Chemex or V60?

A: Both Chemex and V60 produce delicious coffee, but they each have their own unique benefits. For example, Chemex is great for brewing large batches of coffee, while the V60 is better suited for smaller batches.

Q: How do you descale a Chemex Ottomatic?

A: To descale a Chemex Ottomatic, you will need to purchase a descaling solution specifically for coffee brewers. Pour the solution into the water tank and run the brewer according to the manufacturer’s instructions. Be sure to rinse all of the parts with hot water when you are finished.

Q: Are Chemex worth it?

A: Chemex coffee makers are definitely worth the investment. Not only do they produce delicious coffee, but they are also easy to use and easy to clean. Plus, they come in a variety of styles and colors to suit your taste.

Q: How do you clean a pour-over kettle?

A: Pour over the kettle can be easily cleaned by hand with a mild detergent and hot water. Just be sure to rinse well and allow them to dry completely before use.

Q: How do you remove calcium deposits from a coffee maker?

A: If you have calcium deposits in your coffee maker, you can remove them by using a descaling solution specifically for coffee brewers. Pour the solution into the water tank and run the brewer according to the manufacturer’s instructions. Be sure to rinse all of the parts with hot water when you are finished.

Q: What is a good way to store my Chemex?

A: If you are not using your Chemex, it is best to store it in a cool, dry place. You can also wrap it in a towel or cloth to protect it from scratches.

Conclusion:

Cleaning your Chemex is a breeze, and it’s important to keep it in good condition so you can continue making the perfect cup of coffee.

Cleaning a Chemex is easy and can be done in just a few simple steps. By following our guidelines on How to clean Chemex, you can keep your Chemex brewing equipment clean and free of any coffee oils or residue that may affect the taste of your coffee drinks. Are you a Chemex coffee lover? What are some of your favorite tips for making the perfect cup?

Leave a Replay

Follow Us

Recent Posts

Lucky Rodrigues

Lucky Rodrigues

I'm Lucky Rodrigues and I'm the founder at identitycoffees. I've always been obsessed with creating things, which led me to start my first business identitycoffees. At identitycoffees, we focus on building community while providing an amazing cup of coffee. But that's not all. I'm also the founder at Simpleton Cafe- a coffee roastery in Sacramento. Here, I'll be sharing more experience, receipts, and knowledge about coffee, brewing, and roasting... so stay tuned!

Sign up for our Newsletter

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit

You May Also Enjoy These Articles